RMM2 / RMM

RMM2 / RMM radio antenna for use with the MP16 / MP18 radio transmission probes.

Use RMM2 for EU regions and RMM for USA and Japan.

These radio transmission systems are now obsolete and have been superseded by the RMP60 / RMI radio probe system.

About RMM2 and RMM

The RMM2 / RMM is a radio antenna tuned to receive signals from an MP16 / MP18 probe at the carrier frequency. Two RMM2s / RMMs are recommended for each installation to guarantee successful signal transmission.

The RMM2 / RMM base must be mounted to a flat metallic surface using the integral magnets for temporary installations. The mounting holes should be used for permanent installations.

The RMM2 / RMM version required depends on the nominal frequency of transmission, which varies according to the territory in which the probe system is used:

• 433 MHz (UK, Europe)
• 224 MHz (USA, Japan)

Ordering information

Part number	Description
A-2137-0407	RMM2 - rear exit (EU)
A-2137-0170	RMM2 - side exit (EU)
A-2056-1077	RMM - rear exit (USA and Japan)
A-2056-0360	RMM - side exit (USA and Japan)

Useful links

MP16

Upgrade to RMP60

RMP60 probe

Compact steel body with unique (approved world-wide) FHSS radio system.