Navigation
Gram gauge and tools
Technical specifications
Documents
Part numbers
A gauge to adjust, reset and check probe trigger force settings on TP1, TP2 and TP6 touch-trigger probes
Enables the adjustment, reset and checking of probe trigger force settings on all standard Renishaw CMM touch-trigger probes- Setting the optimum trigger force using the gram gauge maximises a probe's performance
- Can be used to set trigger force settings over a range from 4 grams to 35 grams
- Scale graduations are set at 1 gram intervals which is sufficient for all probe force measurements on CMMs
- Due to the use of SI units, the trigger force for probes is given in newtons - 1 gf = 0.01 N
Shop online
Dimensions
Overall height | 95 mm (3.74 in) |
Needle length | 41 mm (1.61 in) |
Depth | 27 mm (1.06 in) |
Width | 43 mm (1.69 in) |
Range | 4 to 35 gram range with 1 gram graduations |
Specification
Probe type | Stylus length | Optimum trigger force (recommended by Renishaw) |
TP1 | 31 mm (1.22 in) | 0.15 N (0.52 ozl) |
TP2-5W | 10 mm (0.39 in) | 0.07 N to 0.08 N (0.24 ozl to 0.28 ozl) |
TP6 | 21 mm (0.82 in) | 0.11 N to 0.13 N (0.38 ozl to 0.45 ozl) |
TP6A | 21 mm (0.82 in) | 0.11 N to 0.13 N (0.38 ozl to 0.45 ozl) |
MIP | 21 mm (0.82 in) | 0.11 N to 0.13 N (0.38 ozl to 0.45 ozl) |
