Data sheets - CMM products

Browse documents

• Leaflet: ACR1 / ACR3 / FCR25 port replacement
  

  Leaflet: ACR1 / ACR3 / FCR25 port replacement

  Renishaw racks allow fast repeatable exchanging of probes and styli without the need for manual intervention. This leaflet covers the replacement of ports for ACR1, ACR3 and FCR25 racks.

  [584kB]
• Leaflet: ACR3 with powered port - power supply addendum (H-1000-4084)
  

  Leaflet: ACR3 with powered port - power supply addendum (H-1000-4084)

  No description available

  [43kB]
• Data sheet: ACR3 autochange rack (H-1000-2024)
  

  Data sheet: ACR3 autochange rack (H-1000-2024)

  Renishaw’s ACR3 is mounted within the CMM’s working envelope and facilitates fast, automatic probe exchange without the need for probe re-qualification. In addition, the ACR3 provides covered storage for probes and extension bars. The ACR3 is a passive rack and installation is cable-free allowing straightforward set-up of the rack.

  [416kB]
• Data sheet: AM2 adjustment module (H-1000-2051)
  

  Data sheet: AM2 adjustment module (H-1000-2051)

  The AM2 adjustment module is designed to provide quick and accurate angular alignment of the PH10MQ PLUS motorised probe head with the axes of the co-ordinate measuring machine and / or the autochange rack.

  [81kB]
• Leaflet: High speed communications cable wiring instructions
  

  Leaflet: High speed communications cable wiring instructions

  Instruction leaflet outlining wiring the Renishaw orange high speed communications cable

  [94kB]
• Leaflet: Renishaw sensors for FARO's Quantum Arm
  

  Leaflet: Renishaw sensors for FARO's Quantum Arm

  Leaftlet describing the benefits of the TP20 and the FARO SENSOR for use with a Quantum FARO portable arm

  [165kB]
• Leaflet: Repair leaflet: MCU E-STOP
  

  Leaflet: Repair leaflet: MCU E-STOP

  Information leaflet outlining the procedure for repairing the MCU E-STOP

  [406kB]
• Leaflet: MCU docking plate (H-1000-5239)
  

  Leaflet: MCU docking plate (H-1000-5239)

  No description available

  [113kB]
• Flyer: MH20 articulating probe head - legacy
  

  Flyer: MH20 articulating probe head - legacy

  MH20 is a compact, infinitely adjustable manual probe head offering maximum flexibility in probe orientation. It can be installed on new and existing measuring machines via shank mounting, and is best suited to manual CMMs.

  [67kB]
• Data sheet: MH20 and MH20i (H-1000-2195)
  

  Data sheet: MH20 and MH20i (H-1000-2195)

  MH20 and MH20i data sheet

  [1.3MB]
• Flyer: MH20i indexing probe head
  

  Flyer: MH20i indexing probe head

  MH20i manual indexing probe head flyer

  [308kB]
• Leaflet: MRS heavy duty legs (H-1000-4063)
  

  Leaflet: MRS heavy duty legs (H-1000-4063)

  Where an MRS installation has numerous SCP80s containing heavy stylus arrangements, or vertical stylus arrangements exceeding 190 mm, it is recommended that the optional MRS heavy duty leg kits are used to provide additional rigidity/height. These kits can be purchased separately to match the number of legs used on the MRS.

  [211kB]
• Leaflet: MRS adjustable footplates (H-1000-4064)
  

  Leaflet: MRS adjustable footplates (H-1000-4064)

  The MRS rail can be placed at different heights from the CMM’s bed by using multiple MRS legs to provide the required clearance for long styli and extension bars. By using the optional MRS adjustable footplates shown below, the MRS rail can also be placed at different positions on the CMM’s bed thereby ensuring that a maximised working volume can be achieved.

  [111kB]
• Leaflet: MRS2
  

  Leaflet: MRS2

  No description available

  [64kB]
• Flyer: PH10 PLUS motorised probe head range (H-1000-3310)
  

  Flyer: PH10 PLUS motorised probe head range (H-1000-3310)

  No description available

  [264kB]
• Flyer: PH10M-iQ PLUS (H-1000-1272)
  

  Flyer: PH10M-iQ PLUS (H-1000-1272)

  PH10M-iQ PLUS – Less time calibrating, more time measuring

  [591kB]
• 规格手册： PH20机动测座 (H-1000-5067) [zh]
  

  规格手册： PH20机动测座 (H-1000-5067)

  PH20是一种动态测量测座，测量效率提高了3倍，同时仍保持极高的系统精度。

  [282kB]
• Leaflet: PHC10-3 switch settings
  

  Leaflet: PHC10-3 switch settings

  No description available

  [88kB]
• Leaflet: PHC10-3 card
  

  Leaflet: PHC10-3 card

  Installation leaflet showing the installation of cards in to PHC10-3

  [845kB]
• Leaflet: RCP repair kit (H-1000-4081)
  

  Leaflet: RCP repair kit (H-1000-4081)

  No description available

  [309kB]
• Leaflet: REVO head kit
  

  Leaflet: REVO head kit

  No description available

  [173kB]
• Leaflet: REVO probe kits
  

  Leaflet: REVO probe kits

  No description available

  [317kB]
• 广告传单： REVO-2和RSP2测头 [zh]
  

  广告传单： REVO-2和RSP2测头

  REVO-2是仅有的在坐标测量机上可同时控制三个机器轴和两个测座轴运动的扫描系统，并且可使用各种2D和3D接触式测头、表面粗糙度检测测头和非接触式影像测头来采集工件数据。

  [521kB]
• 广告传单： RSP3系列测头 [zh]
  

  广告传单： RSP3系列测头

  长度在20 mm至394 mm时的精确扫描测量。RSP3系列测头可在测量过程中以固定的REVO-2测座角度进行三轴扫描。每个测头均可在指定的测针范围内提供理想精度和测力。因此，RSH3测针吸盘只能与相应的RSP3测头配用。

  [299kB]
• 广告传单： RSP3-6加长型测头 [zh]
  

  广告传单： RSP3-6加长型测头

  RSP3-6能够深入大型工件的深孔检测相关特征，可进一步增强系统的测量能力。它配有一系列测针吸盘，适合需要加装直型和曲柄式加长杆的应用场合，用于执行触发式测量和2D扫描测量。

  [492kB]
• 广告传单： RTP20精巧型测座 [zh]
  

  广告传单： RTP20精巧型测座

  RTP20 是经济型测座， 具备“机动”测座的功能，配有集成的TP20触发式测头

  [252kB]
• 广告传单： 适用于REVO-2系统的RUP1超声波测头 [zh]
  

  广告传单： 适用于REVO-2系统的RUP1超声波测头

  RUP1超声波测头用于执行超声波厚度测量，可提升坐标测量机用REVO®五轴测量系统的多类型传感器检测能力。

  [437kB]
• 广告传单： 用于REVO-2的RVP影像测头 [zh]
  

  广告传单： 用于REVO-2的RVP影像测头

  RVP配有边缘检测传感器，可自动与其他各种REVO测头选件互换，进一步扩展了REVO-2系统的应用范围。因此，REVO-2 RVP是测量多种工件及特征类型的理想工具。

  [388kB]
• Flyer: ACM angle change mirror for RVP REVO vision probe
  

  Flyer: ACM angle change mirror for RVP REVO vision probe

  No description available

  [700kB]
• Leaflet: SCP600 stylus change port
  

  Leaflet: SCP600 stylus change port

  The stylus change port (SCP600) is a modular system, designed to allow automatic stylus changing on a CMMs, for the SP600 analogue probe.

  [148kB]
• 规格手册： SFM-A1 [zh]
  

  规格手册： SFM-A1

  拓展集成式表面粗糙度检测范围和能力

  [279kB]
• 规格手册： SFM-A2 (H-1000-2491) [zh]
  

  规格手册： SFM-A2 (H-1000-2491)

  拓展集成式表面粗糙度检测范围和能力

  [315kB]
• 规格手册： SFM-B1 (H-1000-2495) [zh]
  

  规格手册： SFM-B1 (H-1000-2495)

  拓展集成式表面粗糙度检测范围和能力

  [293kB]
• Data sheet: SFM-B2 (H-1000-2296)
  

  Data sheet: SFM-B2 (H-1000-2296)

  Enhanced access and inspection capability for integrated surface finish measurement.

  [204kB]
• Data sheet: SFM-B3 (H-1000-2297)
  

  Data sheet: SFM-B3 (H-1000-2297)

  Enhanced access and inspection capability for integrated surface finish measurement

  [166kB]
• Data sheet: SFM-B4 (H-1000-2298)
  

  Data sheet: SFM-B4 (H-1000-2298)

  Enhanced access and inspection capability for integrated surface finish measurement

  [200kB]
• Data sheet: SFM-B5 (H-1000-2299)
  

  Data sheet: SFM-B5 (H-1000-2299)

  Enhanced access and inspection capability for integrated surface finish measurement

  [187kB]
• Data sheet: SFM-C3 (H-1000-2129)
  

  Data sheet: SFM-C3 (H-1000-2129)

  Enhanced access and inspection capability for integrated surface finish measurement

  [163kB]
• 规格手册： SFM-D1 (H-1000-2505) [zh]
  

  规格手册： SFM-D1 (H-1000-2505)

  拓展集成式表面粗糙度检测范围和能力

  [283kB]
• Data sheet: SFM-E1 (H-1000-2310)
  

  Data sheet: SFM-E1 (H-1000-2310)

  Enhanced access and inspection capability for integrated surface finish measurement

  [160kB]
• Data sheet: SFM-E2 (H-1000-2311)
  

  Data sheet: SFM-E2 (H-1000-2311)

  Enhanced access and inspection capability for integrated surface finish measurement

  [164kB]
• Data sheet: SFM-G1 (H-1000-2131)
  

  Data sheet: SFM-G1 (H-1000-2131)

  Enhanced access and inspection capability for integrated surface finish measurement

  [162kB]
• Data sheet: SFM-H1 (H-1000-2132)
  

  Data sheet: SFM-H1 (H-1000-2132)

  Enhanced access and inspection capability for integrated surface finish measurement

  [170kB]
• 广告传单： SFP2表面粗糙度检测测头 [zh]
  

  广告传单： SFP2表面粗糙度检测测头

  SFP2测头增强了REVO®系统的表面粗糙度测量能力；REVO具有多类型传感器功能，可在同一台坐标测量机上提供触发式、高速接触式扫描和非接触式影像测量。

  [308kB]
• Flyer: Calibration and capability artefacts for SFP2 surface finish probe (H-1000-2500)
  

  Flyer: Calibration and capability artefacts for SFP2 surface finish probe (H-1000-2500)

  Surface finish measurement has traditionally involved the use of hand-held sensors or has required the part to be moved onto a costly dedicated measuring machine. The SFP2 probe for the REVO® 5-axis system changes all this, making surface finish inspection an integral part of CMM measurement, enabling the automatic switching between scanning, optical non-contact and surface finish measurement probe types.

  [606kB]
• Leaflet: SH80K - for SP80 probes supplied before Oct 2007
  

  Leaflet: SH80K - for SP80 probes supplied before Oct 2007

  SH80K installation leaflet for SP80 probes supplied before Oct 2007

  [333kB]
• Flyer: SP25M compact scanning probe system
  

  Flyer: SP25M compact scanning probe system

  New additions to the SP25 family enhance the range of applications The SP25M is two sensors in one, and has unrivalled flexibility due to the system’s modularity. Users can scan for form, position, and size but also take high accuracy discrete points by using a dedicated scanning module or, alternatively, use an adaptor to carry Renishaw’s TP20 range of touch‑trigger probe modules.

  [361kB]
• Flyer: SP600Q in-quill scanning probe
  

  Flyer: SP600Q in-quill scanning probe

  SP600Q in-quill scanning probe flyer

  [113kB]
• Flyer: SP80 ultra-high accuracy scanning probe
  

  Flyer: SP80 ultra-high accuracy scanning probe

  The SP80 quill mounted probe provides class-leading scanning performance, as well as the most flexible use of styli for maximum productivity.

  [267kB]
• Data sheet: SP80 ultra-high accuracy scanning probe (H-1000-2125)
  

  Data sheet: SP80 ultra-high accuracy scanning probe (H-1000-2125)

  The SP80 quill mounted probe provides class-leading scanning performance, as well as the most flexible use of styli for maximum productivity.

  [267kB]
• Leaflet: SPA2-2 / REVO E-STOP modification leaflet
  

  Leaflet: SPA2-2 / REVO E-STOP modification leaflet

  No description available

  [1.3MB]
• Data sheet: TCR20 (H-1000-1371)
  

  Data sheet: TCR20 (H-1000-1371)

  Based on the industry standard range of MCR20 rack systems, TCR20 securely stores modules for rapid automatic changing, protecting mating surfaces from any airborne contaminants within the working envelope of the machine.

  [417kB]
• Flyer: TP20 touch trigger probe system
  

  Flyer: TP20 touch trigger probe system

  TP20 touch trigger probe system flyer

  [298kB]
• Flyer: TP200 precision touch trigger probe
  

  Flyer: TP200 precision touch trigger probe

  High precision TTP with stylus module changing - The TP200 was developed for tightly toleranced workpieces, and where access to features requires long or complex stylus arrangements.

  [391kB]
• Data sheet: TP200 precision touch-trigger probe system with stylus changer (H-1000-2130)
  

  Data sheet: TP200 precision touch-trigger probe system with stylus changer (H-1000-2130)

  TP200 is an electronic probe using strain gauge technology which gives higher accuracy than kinematic touch-trigger probes. TP200 combines outstanding metrology performance with superior functionality to produce a highly versatile DCC CMM probing system with excellent productivity.

  [194kB]
• Leaflet: Trigger force gauge guide (H-1000-4054)
  

  Leaflet: Trigger force gauge guide (H-1000-4054)

  Trigger force is the amount of pressure applied by the helical compression spring onto the pivotal plate and bearing points to hold the stylus mount in place.

  [63kB]
• Leaflet: UCC daughtercards (H-1000-5236)
  

  Leaflet: UCC daughtercards (H-1000-5236)

  No description available

  [54kB]
• Data sheet: Universal datum sphere (H-1000-2250)
  

  Data sheet: Universal datum sphere (H-1000-2250)

  The Renishaw universal datum sphere enhances the performance of manual and fully automated co-ordinate measuring machines

  [323kB]
• Leaflet: Upgrade brackets and blanking plates (H-1000-7585)
  

  Leaflet: Upgrade brackets and blanking plates (H-1000-7585)

  This leaflet details the bracket options available when upgrading or replacing Renishaw controllers and / or probe interfaces. By using a combination of the following brackets and / or blanking panels, any combination of existing and new Renishaw product can be mounted together inside a 19 inch cabinet rack. The bracket kits shown in this leaflet are supplied with all the necessary fixtures.

  [147kB]